Products
  Kalrez®
Bay Seal company
  Parker
Bay Seal company
  O-Rings
Bay Seal company
  Spliced O-Rings
Bay Seal company Materials
Bay Seal company Profiles (Hollow or Solid)
Bay Seal company Cross Sections (CSD) and Tolerances
Bay Seal company
  Custom Molded Shapes
Bay Seal company
  Gaskets
Bay Seal company
  Spring Energized (PTFE) Seals
Bay Seal company
  Extrusions
Bay Seal company
  Specialty Products and Services
Bay Seal company
  Materials
Bay Seal company
Bay Seal company
Bay Seal company
 

Materials

Here are commonly used compounds in the splicing industry, but by no means is it complete, if you have different need that is not mentioned here, please contact us.
 
 
Viton® (FKM)
The most specified material with temperature resistance to 200°C as well as resistant to aggressive fuels, acids, and other chemicals. Excellent compression set resistance Used in the semiconductor, chemical processing industries, and many others.
 
 
 
Buna-N/Nitrile (NBR)
Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -35°C to +120°C, nitrile is the most widely used elastomer in the seal industry today.
 
 
 
Silicone (Q, MQ, VMQ, PVMQ)
Silicone rubber is generally non-reactive, stable, and resistant to extreme environments and temperatures from -50°C to +232°C while still maintaining its useful properties. Silicone compounds are very clean and are used in many food and medical applications.
 
 
 
Ethylene Propylene Rubber (EPDM, EPR)
EPDM has a temperature range of -50°C to +120°/150°C, depending on the curing system. It has great resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight. Also resistant to alcohols, glycol engine coolants and SKY-DROL (phosphate ester hydraulic fluid).